What are some ways to avoid smoke belching?

  1. Perform regular truck maintenance
  2. Use high-quality and clean oil
  3. Observe proper driving habits
  4. Go through smoke emission tests

 

People who drive trucks from Foton Philippines might not have to think about smoke belching given that they’re models are guaranteed to be eco-friendly, but it’s something that every other driver on the road needs to worry about on a daily basis. These commercial trucks, especially those equipped with diesel engines, have a reputation for being dirty. Although it doesn’t apply to all, it’s pretty much an accurate description for many of the other commercial trucks that regularly traverse the roads.

For those who aren’t aware, smoke belching is the forceful expulsion of smoke from a vehicle’s exhaust. More often than not, the smoke that is released is charcoal black, but it is also possible for your vehicle to emit gray, white, or even bluish smoke. Additionally, the smoke is usually thick enough to reduce visibility for vehicles in proximity. It is also possible for small puffs of smoke to be considered smoke belching.

Aside from being one of the biggest contributors to air pollution and the cause of many health issues, smoke belching is against the law, which is why drivers need to worry about it constantly. Once you are accused of smoke belching, a qualified official can strip your vehicle of a license plate and require you to pay a hefty fine. If you don’t want to go through these things, then we suggest you follow these ways to avoid or reduce smoke belching!

 

Perform Regular Truck Maintenance

Smoke belching can be caused by quite a number of things, with the most common one being poor vehicle maintenance. When truck parts such as the engine, air filter, head gasket, turbocharger, and fuel injection aren’t in good condition, it creates issues that lead to unwanted smoke belching.

Some great examples of this are worn valves that push your vehicle to consume more oil than normal. It could also be a problem with the injector which disrupts the balance between the amount of fuel and air that is being burnt. There are times when you have to replace these parts immediately and also instances where a simple clean up could get the job done.

As much as possible, however, avoid driving with faulty or dirty truck parts by performing regular maintenance tasks or taking your vehicle to a trusted mechanic for a timely check-up.

 

Use Clean, High-Quality Oil

Use Clean, High-Quality Oil

The type and quality of oil you use to lubricate the inner components of your engine can also affect the emissions of your truck. Poor-quality oil is sure to cause smoke belching, so try to avoid using these kinds. Unclean oil can also be a contributor to smoke belching, so make it a habit to replace your oil every once in a while. You can include this in your maintenance checklist.

Another thing you may want to keep in mind is to avoid using too much oil as this may lead to a leak or allow the liquid to spill and seep into systems that it’s not supposed to go into. When this happens, excessive amounts of oil are going to be used which will then result in additional emissions.

In this aspect, it’s best to use engine or motor oil that is recommended by the vehicle manufacturer and put exactly as much as indicated in your manual. Also, change your oil on a regular basis and don’t wait for it to turn your emissions to black.

 

Observe Proper Driving Habits

Observe Proper Driving Habits

Stepping too hard on the gas pedal or the brakes prompts the systems in your vehicle to work much harder than they should. Pushing the mechanisms past their limits can cause your truck to emit large amounts of smoke and other harmful exhausts. Other poor driving habits such as speeding, idling, and carrying excess load also produce the same results.

These actions not only cause smoke belching, but they also cause undue wear and tear to your truck’s internal parts. The only piece of advice we can leave you is to drop all your bad driving habits and only develop good ones. Doing this should help you avoid smoke belching and also keep you safe on the road!

 

Go Through Smoke Emission Tests

After you’ve done everything we’ve listed here, there’s really only one more thing you have to do to avoid bumping with authorities and that’s to subject your vehicle to smoke emission tests.

Sometimes, smoke belching isn’t as obvious as a thick and dark cloud of smoke. There are moments when small puffs, though seemingly harmless, may land you in trouble. The reason for this is that smoke belching doesn’t really depend on the thickness or color of the smoke but on how much pollutant it carries.

In order to put yourself at ease, make sure to subject your vehicle to emission tests as required by the city you operate in. You can also do self-service emission testing from time to time just to stay on the safe side.

 

Key Takeaway

With the current state of our environment, which is far from appealing, it’s important that we all do what we can to lessen pollution. Those in the transport sector can do this by ensuring that their trucks and vehicles don’t exude thick clouds of harmful smoke.

Smoke belching is a harmful act that has led to health issues and road accidents and it must be stopped at all costs. There are many ways to do this such as using eco-friendly trucks like those from Foton Philippines. Follow the ways we’ve listed here — they should help keep our environment clean and also prevent any unfortunate incidents on the road!